Cardboard Box Weight: The weight of a cardboard box can vary greatly depending on its size, thickness, and the material it’s made from. On average, a small cardboard box may weigh between 0.5 to 1 pound (0.2 to 0.4 kg), while a larger box may weigh between 1.5 to 2.5 pounds (0.7 to 1.1 kg). However, these are just estimates and actual weights may differ.

Empty cardboard box weight calculator?

you can calculate the estimated weight of an empty cardboard box using the following formula:

Weight = (Length x Width x Height x Board Weight) / Divisor

Where:

Length is the length of the box in inches
Width is the width of the box in inches
Height is the height of the box in inches
Divisor is a constant value that varies based on the type of cardboard used to make the box. For single-wall cardboard, the divisor is usually 194; for double-wall cardboard, the divisor is typically 139.
Board Weight is the weight per square foot of the cardboard used to make the box. This information should be available from the manufacturer or supplier.
For example, if you have a single-wall cardboard box that is 12 inches long, 8 inches wide, and 4 inches high, with a board weight of 0.025 pounds per square foot, the weight calculation would be:

Weight = (12 x 8 x 4 x 0.025) / 194
Weight = 0.395 pounds

Cardboard box weight calculator
you can easily calculate an estimate of the weight of a cardboard box by following these steps:

Measure the length, width, and height of the box in inches.
Look up the weight per square foot of the cardboard used to make the box. This information should be available from the manufacturer or supplier.
Calculate the surface area of the box by multiplying the length by the width, then by 2 (for the top and bottom), and adding the product of the width and height multiplied by 2 (for the sides).
Multiply the surface area by the weight per square foot of the cardboard.
Divide the result by a divisor based on the type of cardboard used. For single-wall cardboard, the divisor is typically 194; for double-wall cardboard, the divisor is usually 139.
The formula to calculate the estimated weight of a cardboard box is:

Weight = (Length x Width x Surface Area Weight) / Divisor

Where:

Length is the length of the box in inches
Width is the width of the box in inches
Surface Area Weight is the weight per square foot of the cardboard used to make the box, multiplied by the surface area of the box
Divisor is a constant value that varies based on the type of cardboard used to make the box.

Box weight calculation formula

The formula to calculate the estimated weight of a cardboard box is:

Weight = (Length x Width x Surface Area Weight) / Divisor

Where:

Length is the length of the box in inches
Width is the width of the box in inches
Surface Area Weight is the weight per square foot of the cardboard used to make the box, multiplied by the surface area of the box
Divisor is a constant value that varies based on the type of cardboard used to make the box.
The divisor value is typically 194 for single-wall cardboard and 139 for double-wall cardboard.

To calculate the surface area of the box, you can use the formula:
Surface Area = 2(LxW) + 2(WxH) + 2(HxL)

where:

L is the length of the box in inches
W is the width of the box in inches
H is the height of the box in inches
To get the weight per square foot of the cardboard, you can refer to the manufacturer’s specifications or contact the supplier.

Weight of a cardboard box in kg

To convert the weight of a cardboard box from pounds to kilograms, you can use the following conversion factor:

1 pound = 0.453592 kilograms

So if the weight of the cardboard box is, for example, 2.5 pounds, you can convert it to kilograms as follows:

Weight in kg = 2.5 pounds x 0.453592 kg/pound
Weight in kg = 1.13398 kg

Therefore, the weight of a cardboard box in kilograms will depend on its size, thickness, and the material it’s made from.

Corrugated box weight calculation in excel

To calculate the weight of a corrugated box in Excel, you can use the following formula:

=(A1B1(2A2+2B2)*C1)/DIVISOR

Where:

A1 is the length of the box
B1 is the width of the box
A2 is the height of the box
B2 is the flute height (the height of the corrugated layer)
C1 is the weight per square foot of the cardboard used to make the box
DIVISOR is a constant value that varies based on the type of cardboard used to make the box. For single-wall cardboard, the divisor is typically 194; for double-wall cardboard, the divisor is usually 139.
This formula will give you the weight of the box in pounds. To convert the result to kilograms, you can multiply it by 0.453592.

Here’s an example:
Suppose you have a single-wall corrugated box with the following dimensions and specifications:

Length: 12 inches
Width: 9 inches
Height: 6 inches
Flute height: 1/4 inch
Weight per square foot: 0.025 pounds
Divisor: 194
In Excel, you can enter the values into cells A1 through C1, and enter the divisor value (194) into cell D1. Then, enter the following formula into cell E1:

=(A1B1(2A2+2B2)*C1)/D1

The result should be 0.4995 pounds. To convert this to kilograms, you can multiply it by 0.453592 or simply use the CONVERT function in Excel as follows:
=CONVERT(E1,”lbm”,”kg”)

This will give you the weight of the box in kilograms, which in this case is approximately 0.2268 kilograms.

Wooden box weight

The weight of a wooden box can vary greatly depending on its size, thickness, and the type of wood used to make it.

On average, a small wooden box may weigh between 1 to 3 pounds (0.5 to 1.4 kg), while a larger box may weigh between 20 to 50 pounds (9 to 23 kg). However, these are just estimates and actual weights may differ.